Skip to content
BloordaleGardens Lock & Key Co.Open 24/7 (289) 804-4797
Person holding a black door-handle assembly and a latch beside a glazed door with exposed lock openings. — Smart Lock Installation, Thorncrest Village

Change or rekey · Thorncrest Village

Smart Lock Installation

You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.

In plain words

A smart lock that came with the house is a special case, and a locksmith treats it as a fresh installation. The device is reset to factory state following the maker's procedure, which clears codes, paired phones and schedules, and then re-enrolled under an account you create. Any hub, voice assistant or automation that had permission to open it is checked separately, because those permissions can outlive a reset on the lock itself. The mechanical override cylinder is rekeyed so the previous owner's key becomes scrap metal. Batteries are replaced, firmware is brought up to date, and the door alignment is checked as it would be for new hardware.

Sound familiar?Thorncrest Village

The call
There are four copies of the front-door key floating around: one with the cleaner, one with a neighbour, one on a hook at your parents' place, and one you honestly cannot account for. You would rather hand out codes you can switch off.

NextHow the visit goes

Smart Lock Installation · Thorncrest Village

How the visit goes

Technician holding a steel deadbolt to the round bore in a white door, with an open tool bag on a dark mat. — Thorncrest Village
  1. Scene 1

    Taking stock of an existing electronic lock

    When a keypad or app lock is already on the door, the assessment is about what it knows and who it answers to. The locksmith notes the model, checks whether the keypad, motor and battery contacts are healthy, and asks whether anyone holds the administrator account, the master code or the override key. A lock the previous owner still controls from an app is not yours yet, however new it looks. If the hardware is sound, a factory reset and a fresh enrolment may be all that is needed; if the motor labours or the keypad has worn digits, replacing it is the better path. Either way the door alignment gets the same scrutiny as for a new install.

  2. Scene 2

    Taking over a lock that is already there

    When the smart lock came with the house or with a rented unit, the work is a controlled handover rather than a physical fit. The locksmith follows the model's own reset procedure, usually a button sequence inside the interior cover, which wipes codes, schedules and paired phones. The lock is then enrolled to an account you create, and every hub, voice assistant or automation once allowed to unlock it is found and removed through its own account or app, since resetting the lock does not always clear those outside connections. Batteries are swapped for a fresh specified set, firmware is updated, the override cylinder is rekeyed, and the bolt is tested through the door as if it were new.

  3. Scene 3

    Keeping the lock healthy through the seasons

    A smart lock asks for a little seasonal attention and rewards it. In spring and autumn, check that the bolt still glides with the door closed and no hand on it; a door that has swollen or dropped starts to strain the motor before it stops working, and a hinge screw or strike adjustment then is far easier than a call later. Keep the keypad free of ice and grit, wipe salt film off the exterior in winter, and use only a dry lubricant on the override cylinder, never oil. Accept firmware updates when the app offers them. If the lock starts to sound laboured, that is its way of asking for a look.

In the van

  • Thick-door extension kit
  • Dry PTFE lubricant
  • Wi-Fi bridge or home hub
  • Adjustable-backset bolt and faceplate
  • Hinge shims and long hinge screws

What shapes the quoteBloordale Gardens Lock & Key Co.

Storm door and weather adjustments
Where the entrance calls for a vented storm door panel, a keypad shield or a model rated for heat and cold exposure, those items are named separately so you can choose them or not.
Removing an old mortise or non-standard lock
Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
Taking over an existing smart lock
Resetting, re-enrolling and cleaning the permissions on a lock that came with the property is a different job from fitting new hardware: less cutting, more account work, and it is quoted on its own footing.

FeesSame any hour

Have it ready

Before you call · 0 / 3

(289) 804-4797

Questions people ask us

I rent. Can I have a smart lock installed?

Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.

Can someone hack a smart lock?

Reputable models encrypt what passes between the lock, the phone and the maker's servers, and the ordinary risks are more mundane: a code shared too widely, a default code never changed, or an account with a weak password. The installation addresses those directly by deleting factory codes, giving each person their own, and setting up your account with a strong password and two-step sign-in where offered. Firmware updates from the app close gaps as they are found, so accept them.

Can I install a smart lock myself?

Many people do, and on a door that already closes perfectly with the standard holes the instructions are manageable. Where a locksmith earns their place is everything around the box: recognizing a bolt that drags before it wears out a motor, enlarging or filling holes cleanly, fitting a reinforced strike, rekeying the override so the old key retires, and setting up the account and codes in a way that is easy to manage later. If you have started and hit a snag, that is a normal call too.

Thorncrest Villageinformation

TorontoOntario

Town
Thorncrest Village, Toronto
In business
13 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 58 in 100 homes · older homes
  • About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.Where housing is mostly older, many entries still have only a knob lock and no deadbolt at all. Adding one is a straightforward job on a solid wood door, and it is the single upgrade that changes most for a house of this kind.
  • Single-detached houses make up about 23% of homes in Toronto (2021 Census).In buildings, the suite door often has a closer and a heavy frame, and the deadbolt sits in a metal or metal-clad door. A locksmith fitting or rekeying one brings the tools and cylinders that suit that construction rather than a wooden house door.

Source: Statistics Canada, Census Profile

Open Thorncrest Village in Google Maps

On-site assessment

Request a visit.

You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into.

(289) 804-4797, open 24/7.